Shears

High-Performance Shears in Racine

Inquire Today

Precision Cuts Every Time


Famco's precision-engineered shears offer unmatched cutting accuracy for various materials. Whether it's metal, plastics, or circuit boards, our shears deliver exceptional performance. Upgrade your cutting capabilities today with Famco's superior shears. Call now to request a quote!

Contact Us

HIGH-SPEED SHEARS


shears

P-A AIR SHEARS

The power mechanism sets the FAMCO Air Shear apart; two deliver the full rated capacity. Features FAMCO quality construction, including an all-steel, box-type bed and members for rugged, rigid support. Installations are fast and easy; simply connect the air line and wire the solenoid valve to any 115-volt AC control panel.



Available in 12GA, 14GA, and 16GA. Capacities in mild steel and up to 1/4 ABS plastic, in 24 to 84 cutting widths.

Get Started
shears

P-100B SERIES

The "P-100B" Series features an anti-friction clutch and brake. The Orttech pneumatic clutch and brake are trouble-free units, self-compensating for wear. This 360° engagement clutch provides instantaneous, accurate shear operation, ensuring the consistent repetition essential to effective cut-to-length lines and feed operations of all kinds.



Available in 14 GA, 16 GA and 18 GA capacities in mild steel and up to 1/4″ ABS plastic, in 24″ to 72″ cutting widths.

Get Started
shears

P-WG SERIES

“P-WG” Series transmissions feature a silent worm gear with an anti-friction clutch and brake. The worm is part of the one-piece clutch shaft to ensure true rigidity. Worm and gear rotate only during the cutting stroke—a fraction of the total operation time of the shear. The Orttech pneumatic clutch and brake are trouble-free units, self-compensating for wear. The gear box with a 15:1 ratio offers smooth operation with high torque capability.



Available in 10GA, 12GA and 14 GA in mild steel and up to 3/8″ ABS plastic in 24″ to 10″ cutting widths.

Get Started
shears

P-PC SERIES

10, 12 AND 14 GAUGE MILD STEEL; 1/4 ABS 24″ TO 84″ CUTTING LENGTH

The "P-100B" Series features an anti-friction clutch and brake. The Orttech pneumatic clutch and brake are trouble-free units, self-compensating for wear. This 360° engagement clutch provides instantaneous, accurate shear operation, ensuring the consistent repetition essential to effective cut-to-length lines and feed operations of all kinds.



Available in 14 GA, 16 GA and 18 GA capacities in mild steel and up to 1/4″ ABS plastic, in 24″ to 72″ cutting widths.

Get Started
shears

P-W SERIES

10 GAUGE TO 1/4″ MILD STEEL; 7/8 ABS 4′ TO 12″ CUTTING LENGTH

The most modern design is incorporated in this rugged, big-capacity series of Famco squaring shears. Whether cutting to capacity or very light-gauge material, each cut is square and accurate. Fast air clutch engagement makes the shear in this series ideal for high production.

Get Started
shears

P-W-OHD SERIES

OVERHEAD DRIVE SHEAR MODELS 3/16″ – 1/4″ 7/8 ABS 96″ – 12′ CUTTING LENGTH *FLAT BED DESIGN

8 additional models are available in Flat Back Design 10 and 14 gauge, 60″–72″ cutting length, including (4) straight upper knife models and (4) bowtie-reversed upper knife models. See pages 13 and 14 for detailed engineering data.

  • 8 additional models are available: 10 and 14 gauge. 60″–72″ Cutting Length
  • (4) Straight Upper Knife Models (4) Bowtie-Reversed Upper Knife Models
Get Started

SQUARING SHEARS


shears

AIR SHEARS

The power transfer mechanism sets the FAMCO Air Shear apart; two powerful air cylinders connected to a common steel torque tube deliver the full rated capacity. The solenoid air valve is quickly actuated by a convenient movable foot switch. Features FAMCO quality construction, including all-steel, box-type bed and end members for rugged, rigid support. Installation is fast and easy: simply connect the air line and plug the solenoid valve into any 115-volt AC outlet. Available in 12GA, 14GA, and 16GA capacities, in cutting widths from 24″ to 84″.

Get Started
shears

AIR OPERATED SHEARS

These shears incorporate two heavy-duty air cylinders, 4″ bore x 5″ stroke. They provide simplicity and higher production capability, along with ease of operation, through a foot air valve. 16GA capacity in 36 and 52 widths.

Get Started
shears

100B SERIES-MECHANICAL SHEARS

Efficient performance makes this 190-strokes-per-minute model the ideal choice for any operation within the stated capacity. In every-day use or cut-to-length lines of lighter materials,these shears offer the versatility of the solenoid-operated clutch and the quality construction found in every FAMCO power shear. B Series shears feature an anti-friction clutch and brake. The Orttech pneumatic clutch and brake are trouble-free units, self-compensating for wear. This 360-degree engagement clutch provides instantaneous, accurate shear operation, ensuring the consistent repetition essential to effective cut-to-length lines and feed operations of all kinds. Available in 18GA, 16GA, and 14GA. capacities, in cutting widths from 24″ to 72″.

Get Started
shears

WG SERIES-MECHANICAL SHEARS

“WG” Series transmissions feature a silent worm gear with an anti-friction clutch and brake. The worm is part of the one-piece clutch shaft to ensure true rigidity. Worm and gear rotate only during the cutting stroke—a fraction of the total operation time of the shear. High-torque pneumatic friction clutches and brakes are trouble-free units.

Get Started
shears

W SERIES-MECHANICAL SHEARS

The most modern design is incorporated in this rugged, big-capacity series of FAMCO squaring shears. Whether cutting to capacity or very light-gauge material, each cut is square and accurate. Fast air clutch engagements and movable guarded foot-switch control make the shears in this series ideal for high-production use. Available in 10GA, 3/16″, and 1/4″ capacities, in cutting widths from 36″ to 12″.

Get Started
shears

HDW SERIES-MECHANICAL SHEARS

The most modern design is incorporated in this rugged, big-capacity series of FAMCO squaring shears. Whether cutting to capacity or very light-gauge material, each cut is square and accurate. Fast air clutch engagements and movable guarded foot-switch control make the shears in this series ideal for high-production use. Available in 3/8″ capacity, in 4ft to 12ft cutting widths.

Get Started
shears
shears

HYDRAULIC SHEARS

Designed for day-to-day cutting of all kinds of material, these rugged, powerful shears transfer power through two heavy-duty hydraulic cylinders connected to a common steel torque tube. A solenoid-operated four-way hydraulic valve is quickly actuated by a convenient movable foot switch. These shears feature FAMCO quality, all-steel construction and heavy-duty hydraulic power units. Installation is fast and easy; simply provide electrical power and you are ready for production. Precise stroke control is provided through a limit switch adjustment. Available in 14GA, 10GA, 1/4 and 3/8 capacities, and in 48 to 12ft cutting widths.



These versatile, compact, low-cost hydraulic shears are equipped with a 3-hp motor, a self-contained hydraulic power unit, a motor starter, an electric solenoid valve, a foot switch, stroke control, and heavy-duty hydraulic cylinders. 16GA. capacity in 36 and 52 cutting widths.

Get Started
shears

GAP STYLE FOOT SHEARS

These versatile, rugged foot shears offer the added features of slitting and notching. The 18-inch gap permits slitting a sheet of any length by successive cuts. Slitting gauge, back gauge, front and side gauges are standard, along with a manually actuated cam holddown and finger guard. Available in 16GA capacity; in 36 and 52 cutting widths.

Get Started
shears

FOOT SHEARS

Standard equipment

  • Tool steel blades
  • Gauges: front, back and side
  • 16 Gauge capacity
  • 36″ & 52″ cutting widths
  • Hold down, spring loaded
  • Lexan, finger guard
  • Support brackets
  • T-slots and hand slot
Get Started
shears
shears

SPECIAL SHEARS

If your problem is a special one—shearing a material that you now feel must be cut by other means, fitting a shearing operation to a new process, or developing a shear specifically designed to cut a new material—FAMCO is eager to offer a solution. FAMCO engineers have the experience and know how to design and produce a shear that will do an efficient job for you, whether the answer lies in a minor revision of an existing model or involves a whole new concept of shearing. Your problem may be solved by a special blade opening, crosshead slope or stroke. It may require a special speed, a different holddown device, or a new electrical circuit. Perhaps a special grinding of blades—even special corrugated blades—will make your operation more efficient and profitable. Whatever your question, consult the acknowledged leader in the field of special shears and let FAMCO advise you.



High-speed 10 gauge 60″ wide cut-to-length line shear. Air clutch, air brake, DC control circuitry and 250 strokes per minute operation make this shear ideal for high-production, accurate shearing.


Available in 16 gauge through 3/8 capacity and 24″ through 12 foot wide.

Special Gap Type Shear the plastic cut-to-length line. The purpose of gap construction is to allow shear to move in and out of the extrusion line without disturbing material flow and to facilitate initial threading of the line. Shear cycles on stroke in less than one second with explosion-proof electricals.

Get Started

MANUFACTURING EXCELLENCE Since 1927


Famco is a leading manufacturer of mechanical shears for cutting metal, plastics, circuit boards, and other material types. Since 1975, Famco has been the preferred source for high-production mechanical, air, and hydraulic squaring shears.


Since 1927, Famco has produced a variety of arbor, foot, and air presses. Famco is an American manufacturer of high-speed cut-to-length shears supplied to large OEM builders that are well known throughout North America and the world. Milwaukee Slide & Spindle is another product line that encompasses precision standard and special linear slide assemblies. The Gorton/Lars product line is supported by a limited offering of engraving cutters, character sets, machine belts, engraving and cutter grinding collets.

Master Craftsmanship in Shear Manufacturing: Famco's Legacy of Excellence


Famco stands out as a pioneer in the field of shear manufacturing, leveraging years of experience to produce top-tier mechanical shears for a diverse range of materials. Their expertise is showcased through their advanced mechanical, air, and hydraulic squaring shears, tailored for high-production environments. As a testament to their mastery, Famco's shears are renowned for their precision and durability, serving as the backbone for industries requiring meticulous cutting solutions.

Let's Get Started

REMANUFACTURE YOUR MACHINES TO NEW-MACHINE TOLERANCE


Famco Machine Division specializes in remanufacturing machines to new-machine tolerance standards. Each machine undergoes meticulous inspection of all components and parts, with damaged or excessively worn parts replaced as needed. Thorough reconditioning is conducted to restore optimal functionality. Following remanufacture, rigorous testing is performed to ensure compliance with new machine tolerances. Upon completion, the machine is restored to a like-new appearance and performance level, backed by a full one-year new machine warranty.

a black and white photo of a machine on a white background .
Squaring Shears Pantographs Cutter Grinders Machine Slides
“W” “WG” “B” Series — Mechanical Shears 3U 265 All Types and Sizes
Hydraulic Shears 3Z 375
Air Shears 3 500
P1-2
Contact Us

Take advantage of Our Specials and Save


Click the button for our specials on various Gorton copy sets and save money without compromising quality. See our other specials below.

Gorton Copy Sets

Forging Innovation: Famco's History


In 1927, Mr. Herman Noll purchased the Freeze and Miller Company, forming his new corporation, Famco Machine Company. Since then, Famco has continued to be an American machine tool manufacturer of arbor, air, and foot presses, as well as power squaring shears. In 1975, the company was sold to Belco Industries, Inc. and continued to manufacture its former products under the Famco Machine Division banner.

In 1987, Famco acquired Gorton Machine Tool products along with Lars Corporation products and moved them to its newly expanded Kenosha facility. These products include the Gorton pantograph (engraving) line as well as the Lars tool and cutter grinders. In 1994, William Blasi purchased 100% of the assets of Famco Gorton/Lars. In 1996, Famco Machine Division and Belco Industries Incorporated acquired the assets of Milwaukee Slide and Spindle Company.


Famco is located on approximately 5 acres in Kenosha, Wisconsin. The current building is 55,000 square feet and is home to corporate offices, engineering, sales, manufacturing and purchasing.

The average length of Famco’s manufacturing personnel is approximately 20 years.

Contact Us
an american flag behind a machine that says famco

Famco's Superior Quality and Durability


Famco manufactures shears, slides, arbor presses, and Gordon Lars accessories. Each product line is manufactured here in Kenosha, Wisconsin, with more than 95% of its content made in America. A fact Famco is very proud of.


Famco has several types of shears in air, hydraulic, and mechanical formats. The mechanical line has the most variations, from geared-down models to high-speed production units. Famco is capable of customizing any of our standard shears to meet your needs. The Milwaukee Slide & Spindle has a multitude of standard slides. MSS produces both dovetail and linear ball guide slides. They can be driven with the standard Acme, V-Groove, or ball screws. Optional drive styles include hydraulic, pneumatic, and/or electric motors. MSS can create custom slides to match your needs too.


Famco arbor presses must be the world’s best arbor press just by looking at all the cheap imitations made of it. Famco produces both air and manual arbor presses. If Famco doesn’t have what you’re looking for, chances are it can still be made here. Just ask. While the Gorton Lars product line may have succumbed to the CNC age, Famco knows very well that there are still many in use today. That is why we still provide the more common accessories and replacement parts. So, don’t hesitate to call. You never know; Famco just may have the part you are looking for.

Call Us
QUICK AND eASY RFQ Form

Ready to get started with Famco? Easily inquire about our available products through our convenient website form! Let us know what you're interested in, and our team will quickly provide all the details you need. Experience seamless communication as we tailor products to match your specific needs, making your decision-making process smooth and stress-free.

Precision on Every Page

Explore Famco's extensive product catalogs to discover a wide range of high-quality machinery solutions. From shears to slides, arbor presses, and accessories, our comprehensive catalogs showcase our commitment to precision and innovation.

What Our Satisfied Customers are Saying


Leave a Review

Why Choose Famco?


Count on Famco for high-quality shears. Our popularity as a renowned machine parts manufacturer is deeply ingrained in our unwavering commitment to excellence in shears. With a diverse range of products, including shears, remanufactured machines, and Gorton Lars accessories, all meticulously crafted in Kenosha, we have solidified our reputation as an industry leader in machine parts manufacturing. Known for our precision engineering and durable construction, our shears cater to various needs and applications. Whether it's customization options, superior craftsmanship, or reliable support for legacy machinery, we emerge as the preferred shears manufacturer for customers seeking top-tier machine parts solutions. Contact us today!

Contact Us
Frequently asked questions

Take a look at our most commonly asked questions for answers. Not seeing what you're looking for? Reach out to us for more information.

  • What services do you offer as a machine parts manufacturer?

    In addition to supplying high-quality machine manufacturing, we also offer the following services:


    • Shears
    • Slides
    • Presses
    • Cutters
    • Machine Slides
    • Spindles
    • Arbor Presses

    Not seeing the service you're looking for or have additional questions? Call us, and one of our knowledgeable team members will be able to answer any questions!

  • What are your service areas?

    Located in Kenosha, we serve the Chicago Metro including the following cities: 


    • Somers
    • Pleasant Prairie
    • Zion
    • Racine
    • Beach Park
    • Salem
    • Waukegan
    • Gurnee
We Want to Hear About Your Needs

Fill out the form or call us at 262-654-3516. One of our knowledgeable team members will be able to assist you with all your machine parts manufacturing needs!

Shears

Share by: